Sichuan SMS Cone Crusher

Characteristics:

1 New and reasonable structure, stable operating and low cost

2 The device condition can be changed freely. The machine can made sand and crush stone. The technology reduces the abrasion of parts and operating cost.

3 Small energy depletion, high output, big crushing rate, energy conservation and environment protection

4 This crusher has the function of coning. The product is cubic. The bulk density is large.

5 The stone material can form protection bottom during product. The machine body has no abrasion.

6 A few easy wear out parts are made of extra hard and strong resistant material. Due to small volume and light weight, they are easy to be replaced.

Operational Principle:

When the Symons cone crusher works, the electric motor passes through the V-belt, large belt wheel, transmission shaft, small bevel gear and large bevel gear, and then takes the eccentric bushing to rotate. The crushing cone axis line rotates under the function of the eccentric bushing; the surface of the crushing wall closes to and takes away from the surface of the rolling mortar wall by turns. At the end the material is crushed to be the required size to discharge from the output after continuous lashing, extruding and bending in the ring crushing cavity which is made up with fixed cone and moving cone.